P80.50-2551-06
1 Electrical connector
2 B-pillar paneling
3 Wiring harness
4 Covers
5 Counterholder
B39/5 Left front ATA [EDW] ultrasonic sensor
B39/7 Left rear ATA [EDW] ultrasonic sensor
N133 Ultrasonic sensor module
| Remove/install | ||
1 | Remove left B-pillar paneling (2) | Lay down B-pillar paneling (2) with lines connected. | |
2 | Remove left door sill molding | ||
3 | Loosen ultrasonic sensor module (N133) with bracket | ||
4 | Disconnect electrical connector (1) and remove ultrasonic sensor module (N133) with B-pillar paneling (2). | ||
5 | Expose wiring harness (3) on B-pillar paneling (2). | ||
6 | Unclip covers (4) from rear and remove toward front | ||
7 | Remove left front ATA ultrasonic sensor (B39/5) and left rear ATA ultrasonic sensor (B39/7) with counterholder (5). | Installation: The left front ATA ultrasonic sensor (B39/5), left rear ATA ultrasonic sensor (B39/7), counterholder (4) and cover (4) are assigned to one another with the letter F (front) and B (rear).If required, glue in left front ATA ultrasonic sensor (B39/5) and left rear ATA ultrasonic sensor (B39/7). | |
8 | Install in the reverse order |
Repair materials
Number | Designation | Order number |
BR00.45-Z-1065-02A | Loctite 401 | Henkel Loctite Deutschland GmbH |
Referenced documents
- ar6830p4100ff Remove/install door sill molding
- ar6830p4700ff Remove/install paneling on B-pillar