ar8050p9840f

Removing and installing ATA alarm signal siren

Type ar · topic 80.50 · version 0100 · 1998-06-15

Applies to: MODEL 210 as of 1.6.98 with CODE (551a) Anti-theft alarm (ATA)

Where it sits

Function group 3 Body › 80 Central locking system, convenience operation, drive authorization systems › 80.50 Anti-theft alarm system (ATA), Interior motion sensor/Tow sensor — Series 210

EinPAS 29 Drive authorization/security system › 29.20 Anti-theft alarm system › 29.20.20 Horn — Series 210

AR80.50-P-9840F

Removing and installing ATA alarm signal siren

14.4.98

MODEL 210 as of 1.6.98 with CODE (551a) Anti-theft alarm (ATA)

Removing and installing ATA alarm signal siren

P80.50-2028-11

1 Screw

2 Electrical connector

3 Bracket

H3/1 Alarm signal siren

Removal, installation

1

Remove inner fender in right front fender

2

Unscrew screw (1)

3

Remove alarm signal siren (H3/1) toward rear

4

Disconnect connector (2) from alarm signal siren (H3/1)

Before disconnecting siren ensure that anti-theft alarm (ATA) is deactivated, otherwise the siren will go off. (Internal power supply with rechargeable battery)

5

Reinstall in opposite order