Removing and installing ATA alarm signal siren

AR80.50-P-9840EC

Removing and installing ATA alarm signal siren

29.01.2016

Model

207

with code 882 (Interior motion sensor)

Shown on model 207 with CODE 882 (Interior monitoring) and CODE 817 (Alarm siren for ATA)

1

Electrical connector

2

Nuts

3

Housing

4

Nut

H3/1

Alarm siren

 

Remove/install

1

Deactivate anti-theft alarm system (ATA)

 The anti-theft alarm system is deactivated when the central locking is open.

2

Remove rear section on fender liner in right front fender

AR88.10-P-1300ELX

3

Disconnect electrical connector (1) from alarm siren (H3/1)

4

Unscrew nuts (2) and remove housing (3) with alarm siren (H3/1)

Model 207
with code 817 (Alarm for anti-theft warning system)
with code 882 (Interior motion sensor)

 Nut, bracket for horn to body/bracket

*BA80.50-P-1003-01D

5.1

Unscrew nut (4) and remove alarm siren (H3/1) from housing (3)

Model 207
with code 817 (Alarm for anti-theft warning system)
with code 882 (Interior motion sensor)

 Nut, horn to bracket

*BA80.50-P-1002-01D

5.2

Unscrew nut and remove alarm siren (H3/1) from bracket

Model 207
with code 882 (Interior motion sensor)
except code 817 (Alarm for anti-theft warning system)

 Nut, horn to bracket

*BA80.50-P-1002-01D

6

Install in the reverse order

 Anti-theft alarm system

Number

Designation

Model 207

BA80.50-P-1002-01D

Nut, horn to bracket

Nm

10

 Anti-theft alarm system

Number

Designation

Model 207

BA80.50-P-1003-01D

Nut, bracket for horn to body/bracket

Nm

8