ar8050p9840e

Removing, installing ATA alarm signal siren

Type ar · topic 80.50 · version 0101 · 1998-09-15

Applies to: MODEL 202, 208 as of 1.6.98 with CODE (551a) Anti-theft alarm (ATA)

Where it sits

Function group 3 Body › 80 Central locking system, convenience operation, drive authorization systems › 80.50 Anti-theft alarm system (ATA), Interior motion sensor/Tow sensor — Series 202 · Series 208

EinPAS 29 Drive authorization/security system › 29.20 Anti-theft alarm system › 29.20.20 Horn — Series 202 · Series 208

AR80.50-P-9840E

Removing, installing ATA alarm signal siren

23.4.98

MODEL 202, 208 as of 1.6.98 with CODE (551a) Anti-theft alarm (ATA)

Removing, installing ATA alarm signal siren

P80.50-2029-11

Shown on model 202

1 Bolt

2 Electrical connection

H3/1 Alarm signal siren

Removal, installation

1.1

Remove left front wheelhousing liner

Model 202

1.2

Remove trim panel between bumper and left front wheelhousing liner

Model 208

2

Disconnect connection (2) of alarm signal siren (H3/1)

Before disconnecting the siren, ensure that the anti-theft alarm system (ATA) has been deactivated, otherwise the siren will be triggered.

(Internal voltage supply from rechargeable battery)

3

Remove bolt (1), remove alarm signal siren (H3/1).

4

Install in reverse order