ar8050p9830ea

Removing and installing anti-theft alarm (ATA) control unit

Type ar · topic 80.50 · version 0103 · 1998-02-13

Applies to: MODEL 202 up to 31.5.97 with CODE (491) USA version with CODE (551a) Anti-theft alarm (ATA) with CODE (552a) Anti-theft alarm (ATA) for Switzerland

Where it sits

Function group 3 Body › 80 Central locking system, convenience operation, drive authorization systems › 80.50 Anti-theft alarm system (ATA), Interior motion sensor/Tow sensor — Series 202

EinPAS 29 Drive authorization/security system › 29.20 Anti-theft alarm system › 29.20.11 Control unit/relay — Series 202

AR80.50-P-9830EA

Removing and installing anti-theft alarm (ATA) control unit

9.7.93

MODEL 202 up to 31.5.97
with CODE (491) USA version
with CODE (551a) Anti-theft alarm (ATA)
with CODE (552a) Anti-theft alarm (ATA) for Switzerland

Removing and installing anti-theft alarm (ATA) control unit

P82.50-0003-06

1 Trunk mat

2 Plastic screws

3 Cover

4 Cover

N26 ATA control unit

Removal, installation

1

Open trunk lid

2

Take out trunk mat (1)

3

Disconnect ground cable at the battery

AR54.10-P-0003A

4

Remove plastic screws (2)

5

Take covers (3 and 4) out of trunk insert

6

Unplug connector at control unit (N26), plug in

7

Press down catches at control unit (N26) and take out control unit (N26)

Pay attention to different versions
for Standard, and !

8

Install in the reverse order

after installing

Perform operational check for control unit (N26)

dh1303pa20411x

Diagnosis Manual Body 13.3 11/1

Read fault memory and erase

dh0000pa10003x

Diagnosis Manual Body 0 3/1

Referenced documents