ar8050p9820ea

Removing and installing transmitter/receiver unit for infrared interior motion sensor

Type ar · topic 80.50 · version 0103 · 1998-06-27

Applies to: MODEL 202 with CODE (882a) Interior motion sensor (infrared)

Where it sits

Function group 3 Body › 80 Central locking system, convenience operation, drive authorization systems › 80.50 Anti-theft alarm system (ATA), Interior motion sensor/Tow sensor — Series 202

EinPAS 29 Drive authorization/security system › 29.20 Anti-theft alarm system › 29.20.14 Transmitter/receiver — Series 202

AR80.50-P-9820EA

Removing and installing transmitter/receiver unit for infrared interior motion sensor

9.7.93

MODEL 202 with CODE (882a) Interior motion sensor (infrared)

Removing and installing transmitter/receiver unit for infrared interior motion sensor

P82.55-0008-06

7 Cap

8 Screw

9 Screw

10 Connector

11 B-pillar trim

A26/4 Left transmitter and receiver unit, infrared (IR) interior motion sensor

A26/5 Right transmitter and receiver unit, infrared (IR) interior motion sensor

Removal, installation

1

Press off cap (7)

Installing: Ensure catches engage
properly

2

Pull off door weatherseal in the area of B-pillar

3

Take off B-pillar trim (11)

4

Remove screws (8, 9) at transmitter and receiver unit (A26/4, A26/5)

5

Unplug connector (10)

6

Take off transmitter and receiver unit (A26/4, A26/5)

7

Install in the reverse order

after installing

Perform operational check

dh1303pa20411x

Diagnosis Manual Body 13.3 11/1

Read fault memory and erase

dh0000pa10003x

Diagnosis Manual Body 0 3/1