Remove/install passenger compartment/load compartment interior protection sensors · ar8050d9833m · Mercedes-Benz WIS

AR80.50-D-9833M

Remove/install passenger compartment/load compartment interior protection sensors

31.08.2016

Model

900, 906

D80.50-1156-07

Shown on front sensor (1) on vehicles with code V36 (Headliner)

D80.50-1157-09

Shown on rear sensor (1) on vehicle except code V36 (Headliner)

1	Sensor		6	Bolts
5	Electrical connector		7	Adhesive strips

	Information on preventing damage to electronic components due to electrostatic discharge		AH54.00-P-0001-01A
	Notes on carrying out repair work in the vehicle interior		AH68.00-N-0001-01S
 	Remove/install
1.1	Detach clip (3) through opening in sensor (1) with suitable tool (2) from headliner (4) and remove sensor (1) until electrical connector (5) is accessible	Model 900 Model 906 with code V36 (Panelling under roof)
1.2	Unscrew bolts (6) and remove sensor (1) until electrical connector (5) is accessible	Model 906 except code V36 (Panelling under roof)
2	Disconnect electrical connector (5) and remove sensor (1)
	Check
3	Check adhesive strips (7) for damage and condition	Model 906 except code V36 (Panelling under roof) If sensor (1) is not replaced.
		If complaint present
		
		Replace adhesive strips (7) with commercially available adhesive tape.
4	Install in the reverse order
	Check
5	Check interior protection system for proper function
	Table of contents for function description for anti-theft alarm system (ATA)		GF80.50-D-0999H

ah5400p000101a Information on preventing damage to electronic components due to electrostatic discharge
ah6800n000101s Notes on carrying out repair work in the vehicle interior
gf8050d0999h Table of contents for function description of anti-theft alarm system (ATA)