ar8050d9830a
Remove/install anti-theft alarm (ATA) control unit
Type ar · topic 80.50 · version 0106 · 2020-01-27
Applies to: Model 901.0/3/4, 902.0/3/4, 903.0/3/4, 904.0/3/4 with code J67 (Anti-theft alarm system)
Where it sits
Function group 3 Body › 80 Central locking system, convenience operation, drive authorization systems › 80.50 Anti-theft alarm system (ATA), Interior motion sensor/Tow sensor — Series 901 (models 0**, 3**, 4**) · Series 902 (models 0**, 3**, 4**) · Series 903 (models 0**, 3**, 4**) · Series 904 (models 0**, 3**, 4**)
EinPAS 29 Drive authorization/security system › 29.20 Anti-theft alarm system › 29.20.11 Control unit/relay — Series 901 (models 0**, 3**, 4**) · Series 902 (models 0**, 3**, 4**) · Series 903 (models 0**, 3**, 4**) · Series 904 (models 0**, 3**, 4**)
AR80.50-D-9830A
| Remove/install anti-theft alarm (ATA) control unit
| 10.01.2020
|
Model
| 901.0/3/4, 902.0/3/4, 903.0/3/4, 904.0/3/4
|
|
| with code J67 (Anti-theft alarm system)
|
1
| ATA [EDW] control unit
|
2
| Connector
|
3
| Screw
|
4
| Screw
|
5
| Cover
|
| Remove/install
|
|
|
Topical note
| Notes on battery
|
| AH54.10-P-0001-01A
|
1
| Push driver's seat forward up to end stop (arrow)
|
|
|
2
| Remove cover (5) below driver seat
|
|
|
3
| Open flap on the driver seat frame (arrow) and pull out electrics module
|
|
|
4
| Remove ATA control unit (1) from the carrier plate
|
|
|
5
| Detach plug (2) from the ATA control unit (1)
|
|
|
6
| Install in the reverse order
|
|
|
Referenced documents
