AR80.35-P-4210RT | Remove/install batteries for transmitter key | 4.10.04 |
MODEL 251 with CODE (889) Keyless Go
P80.35-2218-09
1 Inspection window
2 Lock button
3 Release button
4 Trunk lid remote control button
5 Manual key
6 Slide
7 Transmitter key
8 Latch
9 Battery compartment
10 Battery
11 Battery
| Remove/Install | ||
| Notes on avoiding damage to electronic components due to electrostatic discharge | All models | |
1 | Slide lock (6) to side (arrow A) and pull out manual key (5) (arrow B) | ||
2 | Actuate lock (8) with manual key (arrows C and D) while pulling battery compartment (9) out of transmitter key (arrow E) | Carefully remove battery compartment to prevent damaging electrical contacts! | |
Installation: Battery compartment should arrest in transmitter key | |||
3 | Carefully slide out battery (10) in direction of arrow (F) | Do not damage or contaminate contact spring | |
Installation: Observe polarity (positive sign points upward) | |||
4 | Carefully slide out battery (11) in direction of arrow (G) | Do not damage or contaminate contact spring | |
Installation: Observe polarity (positive sign points upward) | |||
5 | Install in the reverse order | ||
6 | Check batteries for transmitter key |
Referenced documents
- ah5400p000101a Information on preventing damage to electronic components due to electrostatic discharge
- ar8035p4205rt Check batteries for transmitter key
- ar8035p4205rta Check batteries for transmitter key