ar8035d4515f

Remove/install transponder coil

Type ar · topic 80.35 · version 0100 · 2013-02-13

Applies to: MODEL 909

Where it sits

Function group 3 Body › 80 Central locking system, convenience operation, drive authorization systems › 80.35 Radio-frequency actuated, remote control — Series 909

EinPAS 29 Drive authorization/security system › 29.16 Locking/unlocking › 29.16.14 Transmitter/receiver — Series 909

EinPAS 29 Drive authorization/security system › 29.25 Drive authorization › 29.25.14 Transmitter/receiver — Series 909

AR80.35-D-4515F

Remove/install transponder coil

25.01.2013

MODEL

909

Remove/install transponder coil

1

Transponder coil

2

Drive switch

3

Electrical center

4

Connector

D80.35-0008-05

Remove/install

1

Loosen electrical center (3)

AR54.25-D-1382F

Electrical connectors and circuit 30 can remain connected.

2

Separate connector (4) of transponder coil (1)

3

Expose electric cable up to transponder coil (1)

Observe routing of electrical line.
Electric lead must be routed above the two upper connectors of the central electrical system (3).

4

Press transponder coil (1) off of drive switch (2) with suitable plastic wedge

5

Install in the reverse order

Referenced documents