ar8030p4500ca

Removing and installing IR drive authorization system control module

Type ar · topic 80.30 · version 0100 · 1997-04-25

Applies to: MODEL 140 as of 1.6.96 up to 31.5.97

Where it sits

Function group 3 Body › 80 Central locking system, convenience operation, drive authorization systems › 80.30 Infrared remote control — Series 140

EinPAS 29 Drive authorization/security system › 29.16 Locking/unlocking › 29.16.11 Control unit/relay — Series 140

EinPAS 29 Drive authorization/security system › 29.25 Drive authorization › 29.25.11 Control unit/relay — Series 140

AR80.30-P-4500CA

Removing and installing IR drive authorization system control module

12.12.96

MODEL 140 as of 1.6.96 up to 31.5.97

Removing and installing IR drive authorization system control module

P80.30-0302-01

1 2-pin CAN connector
2 2-pin connector for transponder coil
3 18-pin connector
4 Base plate
N54/1 IR DAS control module
W1 Main ground (behind instrument cluster)

Illustrated on model 210

Removal, installation

1

Remove instrument cluster

2

Disconnect 2-pin CAN connector (1)

3

Disconnect 2-pin connector for transponder coil (2)

4

Disconnect 18-pin connector

Press retaining lugs (arrows) apart

Remove IR DAS control module (N54/1) from base plate (4)

When replacing control module or remote control key always indicate lock number, because the two parts are matched to one another. After replacing the IR DAS control module (N54/1) perform version coding according to diagnosis manual

Installation: When installing insert rear retaining lug on IR DAS control module (N54/1) into base plate (4).

Reinstall in opposite order