ar8020p2300rt

Remove/install fuel filler flap CL element

Type ar · topic 80.20 · version 0101 · 2010-07-28

Applies to: MODEL 251

Where it sits

Function group 3 Body › 80 Central locking system, convenience operation, drive authorization systems › 80.20 Central locking system, interior central locking — Series 251

EinPAS 29 Drive authorization/security system › 29.16 Locking/unlocking › 29.16.31 Actuator motor/actuator — Series 251

AR80.20-P-2300RT

Remove/install fuel filler flap CL element

20.7.10

MODEL 251

Remove/install fuel filler flap CL element

P80.20-3617-06

1 Tank recess

2 Guides

3 Connector

4 Connector

5 Emergency unlocking cable

M14/10 Fuel filler flap CL [ZV] motor

Remove/install

Danger!

Risk of explosion caused by fuel igniting, risk of poisoning caused by inhaling and swallowing fuel and risk of injury to eyes and skin caused by contact with fuel

No fire, sparks, open flames or smoking.
Pour fuels only into suitable and appropriately marked containers.

Wear protective clothing when handling fuel.

AS47.00-Z-0001-01A

1

Remove tank recess (1)

AR88.60-P-2000RT

2

Turn locks horizontally and remove side right cargo space paneling

3

Remove insulating mats in right rear side section

So that emergency unlocking cable (5) can be routed.

4

Slide fuel filler flap CL motor (M14/10) toward front of vehicle

Until guides (2) are released.

5

Unlock the connector (4) and detach from the coupling (3) on the fuel filler flap CL [ZV] motor (M14/10)

6

Remove fuel filler flap CL motor (M14/10) toward outside through tank opening

Handle the fuel filler flap CL [ZV] motor (M14/10) carefully otherwise paint damage can occur.

7

Install in the reverse order

Referenced documents