ar8020p2300ea

Removing and installing CL actuator for tank flap

Type ar · topic 80.20 · version 0101 · 1997-04-25

Applies to: MODEL 202.07/08/18

Where it sits

Function group 3 Body › 80 Central locking system, convenience operation, drive authorization systems › 80.20 Central locking system, interior central locking — Series 202 (models 07*, 08*, 18*)

EinPAS 29 Drive authorization/security system › 29.16 Locking/unlocking › 29.16.31 Actuator motor/actuator — Series 202 (models 07*, 08*, 18*)

AR80.20-P-2300EA

Removing and installing CL actuator for tank flap

12.1.96

MODEL 202.07/08/18

Removing and installing CL actuator for tank flap

P80.20-0327-06

1 Side paneling

2 Mounting lug

3 Tank flap actuator

4 Pneumatic line

8 Holder

9 Bolts

Removal, installation

1

Remove side paneling (1) in rear on right

AR68.30-P-4780A

2

Pry off pneumatic line (4) with open end wrench (7 mm)

Be careful not to break the insert profile

3

Loosen bolts (9)

4

Unhook tank flap actuator (3) with holder (8) from support strut

5

Press mounting lug (2) and pull off
holder (8)

6

Check tank flap actuator (3) for proper pneumatic function

See Diagnosis Manual, Body 3.2 PSE/ZV 32

7

Reinstall in opposite order

Referenced documents