ar8020d0002ts

Remove/install central locking system antenna amplifier

Type ar · topic 80.20 · version 0100 · 2018-01-09

Applies to: Model 907, 910

Where it sits

Function group 3 Body › 80 Central locking system, convenience operation, drive authorization systems › 80.20 Central locking system, interior central locking — Series 907 · Series 910

EinPAS 29 Drive authorization/security system › 29.16 Locking/unlocking › 29.16.14 Transmitter/receiver — Series 907 · Series 910

AR80.20-D-0002TS

Remove/install central locking system antenna amplifier

20.12.2017

Model

907, 910

Remove/install central locking system antenna amplifier

D80.20-1197-09

1

Central locking system antenna amplifier

2

Electrical connector

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

Remove/install

1

Switch off ignition and store transmitter key outside of transmission range (min. 2 m)

2

Remove cover for center loudspeaker

AR68.30-D-3446TS

3

Unclip the central locking system antenna amplifier (1) to the rear in the direction of the arrow (arrow A) and move it upwards until the electrical connector (2) can be accessed

WIS Service Media
wsm://04_201711_01
Operation steps 3 to 4 are shown here.

Clip remover

*452589016300

4

Disconnect electrical connector (2) and remove central locking system antenna amplifier (1)

5

Install in the reverse order

Check

6

Carry out a function check of the central locking with transmitter key

Remove/install central locking system antenna amplifier

452 589 01 63 00

Clip remover

Referenced documents