ar7770s0013s

Remove/install manual pop-up roof lock bottom section

Type ar · topic 77.70 · version 0104 · 2010-11-23

Applies to: MODEL 639.713 /813 with CODE (ZK9) Pop-up roof

Where it sits

Function group 3 Body › 77 Sliding roof, soft top, top attachments › 77.70 Mechanical pop-up roof — Series 639 (models 713, 813)

EinPAS 38 Roof system › 38.17 Pop-up roof › 38.17.30 Pop-up roof — Series 639 (models 713, 813)

AR77.70-S-0013S

Remove/install manual pop-up roof lock bottom section

18.11.10

MODEL 639.713 /813 with CODE (ZK9) Pop-up roof

Remove/install manual pop-up roof lock bottom section

S77.70-4510-11

1 Locking bottom section

2 Bolts

Remove/install

Danger!

Risk of injury caused by fingers being pinched or crushed when removing, installing or aligning hoods, doors, trunk lids, liftgates or sliding roof

Keep body parts and limbs well clear of moving parts.

AS00.00-Z-0011-01A

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

1

Open pop-up roof

AR77.70-S-0001-01A

2

Remove locking bottom section (1)

To do this, remove bolts (2). Mark installation position of lock bottom section (1).

Installation: Observe installation position.

*BA77.70-N-1003-01A

3

Install in the reverse order

Mechanical pop-up roof

Number

Designation

Model
639.713/813 with code ZK9

BA77.70-N-1003-01A

Bolt, locking bottom section to roof cutout for pop-up roof

Nm

10

Referenced documents