ar7770s0013e

Remove/install manual pop-up roof lock bottom section

Type ar · topic 77.70 · version 0100 · 2014-10-16

Applies to: MODEL 447.7/8 with CODE ZK9 (Lifting roof hatch)

Where it sits

Function group 3 Body › 77 Sliding roof, soft top, top attachments › 77.70 Mechanical pop-up roof — Series 447 (models 7**, 8**)

EinPAS 38 Roof system › 38.17 Pop-up roof › 38.17.30 Pop-up roof — Series 447 (models 7**, 8**)

AR77.70-S-0013E

Remove/install manual pop-up roof lock bottom section

20.08.2014

MODEL	447.7/8
	with CODE ZK9 (Lifting roof hatch)

Remove/install manual pop-up roof lock bottom section

Shown on left side of vehicle

1	Locking bottom section
2	Bolts

S77.70-4510-11

 Danger !	Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.	No parts of the body or limbs should be within the operating area when the components are moving.	AS00.00-Z-0011-01A
	Notes on carrying out repair work in the vehicle interior		AH68.00-N-0001-01S
 	Remove/install
1	Open pop-up roof		AR77.70-S-0001-01E
2	Mark assembly position of corresponding locking bottom section (1)
3	Unscrew bolts (2) at corresponding locking bottom section (1) and remove locking bottom section (1)	 Installation: Observe marking.
		 Screw/bolt, locking bottom section to roof cutout for pop-up roof	*BA77.70-N-1001-01B
4	Install in the reverse order

 Pop-up roof, manual

Number	Designation		MODEL 447.7/8 with CODE ZK9 (Lifting roof hatch)
BA77.70-N-1001-01B	Screw/bolt, locking bottom section to roof cutout for pop-up roof	Nm	10

Referenced documents

ah6800n000101s Notes on carrying out repair work in the vehicle interior
ar7770s000101e Open/close manual pop-up roof
as0000z001101a Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.