AR77.55-M-6180A | Remove/install roof hatch motor | 3.9.04 |
MODEL 903.662
Minibus Sprinter Eco
MODEL 903.662
Minibus Sprinter Group
MODEL 903.662
Minibus Sprinter Mobility
MODEL 903.663
Minibus Sprinter Eco
MODEL 903.663
Minibus Sprinter Group
MODEL 903.663
Minibus Sprinter Mobility
MODEL 904.663
Minibus Sprinter Eco
MODEL 904.663
Minibus Sprinter Group
MODEL 904.663
Minibus Sprinter Classic
MODEL 904.663
Minibus Sprinter Tourist
MODEL 904.663
Minibus Sprinter, low platform
MODEL 905.613
Minibus Sprinter Classic, 6 t
MODEL 905.613
Minibus Sprinter, low platform, 6 t
M77.55-0002-11
1 Bolt
2 Roof hatch motor
3 Cover frame
| Remove/install | ||
Danger! | Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof. | When moving components, ensure that no body parts or limbs are within the operating range of moving parts. | |
1 | Remove roof hatch | ||
2 | Remove cover frame (3) | ||
3 | Disconnect connector to roof hatch motor (2) | ||
4 | Unscrew bolts (1) and remove roof hatch motor | ||
5 | Install in the reverse order | ||
6 | Check roof hatch for proper function |
Referenced documents
- ar7755m6170a Remove/install roof hatch
- as0000z001101a Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.