ar7755d5050ec

Remove/install receiver for lifting/tilting roof window remote control

Type ar · topic 77.55 · version 0100 · 2005-08-11

Applies to: MODEL 903.6 with CODE (ZL9) "James Cook" touring camper with CODE (DL1) Power lifting, tilting roof window, James Cook

Where it sits

Function group 3 Body › 77 Sliding roof, soft top, top attachments › 77.55 Roof hatches, emergency exits — Series 903 (models 6**)

EinPAS 38 Roof system › 38.30 Roof hatch/emergency exit/roof vent flap › 38.30.12 Sensor/switch/wiring harness — Series 903 (models 6**)

AR77.55-D-5050EC

Remove/install receiver for lifting/tilting roof window remote control

17.3.05

MODEL 903.6
with CODE (ZL9) "James Cook" touring camper
with CODE (DL1) Power lifting, tilting roof window, James Cook

Remove/install receiver for lifting/tilting roof window remote control

D77.55-0002-04

1 Inner frame

2 Bolts

3 Electrical lines

4 Receiver

Remove/install

Danger!

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

When moving components, ensure that no body parts or limbs are within the operating range of moving parts.

AS00.00-Z-0011-01A

1

Remove interior frame (1) from lifting/tilting roof window (A101)

AR77.55-D-5000ECA

2

Loosen bolt (2)

3

Loosen electrical lines (3) from inner frame (1) of lifting/tilting roof window (A101)

4

Remove receiver (4) of remote control unit from lifting/tilting roof window (A101)

5

Install in the reverse order

Referenced documents