ar7755d5000a

Remove lifting/tilting roof window

Type ar · topic 77.55 · version 0101 · 2004-12-15

Applies to: MODEL 903.662 with CODE (ZU8) National version for USA with CODE (Z29) "James Cook" touring camper, NAFTA with CODE (DL1) Electric lifting/tilting roof window, James Cook

Where it sits

Function group 3 Body › 77 Sliding roof, soft top, top attachments › 77.55 Roof hatches, emergency exits — Series 903 (models 662)

EinPAS 38 Roof system › 38.30 Roof hatch/emergency exit/roof vent flap › 38.30.30 Roof hatch/emergency exit/roof vent flap — Series 903 (models 662)

AR77.55-D-5000A

Remove lifting/tilting roof window

12.5.04

MODEL 903.662
with CODE (ZU8) National version for USA
with CODE (Z29) "James Cook" touring camper, NAFTA
with CODE (DL1) Electric lifting/tilting roof window, James Cook

Remove lifting/tilting roof window

D77.55-0010-06

1 Covers

Remove lifting/tilting roof window

D77.55-0011-06

2 Plug

3 Bolts

4 Inner frame for lifting/tilting roof window

Remove lifting/tilting roof window
Remove lifting/tilting roof window

D77.55-0013-01

5 Nuts

6 Printed circuit board

7 Connector

8 Bolts

9 Screw connector

10 Electrical lines

D77.55-0014-01

Remove lifting/tilting roof window

D77.55-0015-06

11 Bolts

12 Assembly stands

13 Outer frame for lifting/tilting roof window

Remove/Install

Danger!

Risk of injury caused by body parts becoming jammed, pinched or severed by doors, covers, flaps or by loose components

Keep body parts well clear when moving doors, covers, flaps and components. Wear protective gloves and protective shoes.

AS00.00-Z-0025-01A

Danger!

Risk of death caused by falling down from the roof of the vehicle. Risk of injury to other persons caused by falling objects during work in the area of the roof.

Work on or in the area of the vehicle's roof may only be performed on suitable equipment (ladders, scaffolds, lifting platforms). Sufficiently secure the area to be worked in.

AS65.00-Z-0002-01B

1

Unclip covers (1) and remove

Mounting wedge

*110589035900

2

Remove plug (2) from fluorescent lamps

3

Remove fluorescent lamps

4

Remove bolts (3)

5

Fold down inner frame for lifting/tilting roof window (4)

6

Detach connector (7)

7

Unscrew nut (5) from printed circuit board (6)

8

Remove printed circuit board (6)

9

Unscrew screws (8) from screw connectors (9)

Note installation position of electrical lines (10).

10

Pull electrical lines (10) out of screw connectors (9)

11

Remove lifting/tilting roof window inner frame (4)

12

Unscrew screws (11) from assembly stands (12)

13

Remove assembly stands (12)

14

Remove outer frame for lifting/tilting roof window (13) from outside

Helper required

15

Install in the reverse order

16

Perform a function test

17

Carry out leak checks

Remove lifting/tilting roof window

Mounting wedge

110 589 03 59 00

Referenced documents