ar7737p4175ka

Removing and installing hydraulic cylinder for soft top compartment cover

Type ar · topic 77.37 · version 0103 · 2001-07-17

Applies to: MODEL 208.435 /444 /445 /447 /448 /465 /470

Where it sits

Function group 3 Body › 77 Sliding roof, soft top, top attachments › 77.37 Vario roof, soft top - hydraulic system — Series 208 (models 435, 444, 445, 447, 448, 465, 470)

EinPAS 38 Roof system › 38.20 Soft top/coupé roof/vario roof › 38.20.40 Soft top drive — Series 208 (models 435, 444, 445, 447, 448, 465, 470)

AR77.37-P-4175KA

Removing and installing hydraulic cylinder for soft top compartment cover

27.2.98

MODEL 208.435 /444 /445 /447 /448 /465 /470

Removing and installing hydraulic cylinder for soft top compartment cover

P77.37-2025-06

1 Soft top compartment cover

2 Tie strap

3 Lock plates

4 Hydraulic lines

5 Retainer

6 Hydraulic cylinder

7 Spherical bolt

Removing, installing

1

Remove inner paneling from soft top compartment cover (1)

2

Open cable strap (2)

3

Secure soft top compartment cover against slamming shut unintentionally

4

Press off lock plates (3) and pull out hydraulic lines (4)

Immediately plug hydraulic lines with plugs , plug connections on hydraulic cylinder with blind plug .

Plug no. -07

*129589009100

Blind plug no. -01

*129589009100

5

Remove upper and lower retainer (5) from hydraulic cylinder

Turn retainer and pull out upward or downward

6

Remove hydraulic cylinder (6) from spherical bolt (7) at top and at bottom

7

Install in the reverse order

8

Bleed soft top system

AR77.37-P-1000-03KA

Removing and installing hydraulic cylinder for soft top compartment cover

Set of plugs

129 589 00 91 00

Referenced documents