ar7733p1020lca

Remove/install side flap for soft top

Type ar · topic 77.33 · version 0100 · 2015-11-03

Applies to: Model 217.4

Where it sits

Function group 3 Body › 77 Sliding roof, soft top, top attachments › 77.33 Vario roof, soft top - mechanical system — Series 217 (models 4**)

EinPAS 38 Roof system › 38.20 Soft top/coupé roof/vario roof › 38.20.30 Soft top/soft top frame — Series 217 (models 4**)

AR77.33-P-1020LCA

Remove/install side flap for soft top

21.10.15

Model

217.4

Remove/install side flap for soft top

A

Hinge

B

Suitable tool

P77.33-2200-11

Remove/install side flap for soft top

1

Soft top compartment lid

2

Side flap for soft top

3

Wire

4

Nut

5

Bolts

6

Hook eyelet

P77.33-2199-03

Danger !

Risk of injury. Moving parts can pinch, crush or, in extreme cases even sever extremities.

No parts of the body or limbs should be within the operating range of the mechanism when moving components.

AS00.00-Z-0009-01A

Remove/install

1

Close soft top

With soft top open.

2

Move soft top compartment lid (1) to vertical position

3

Secure soft top compartment lid against falling down

Installation:
Hydraulic system looses pressure over time. Carefully lay down soft top compartment.
Otherwise damage can occur.

Installation:
Alway remove suitable tools (B) from holes in hinges (A).
Otherwise the soft top compartment (1) can be damaged.

For this purpose insert suitable tools (B) into holes in hinges (A).

4

Loosen nut (4) and remove wire (3).

5

Unhook hook eyelet (6) from side flap for soft top (2)

6

Unscrew bolts (5).

Bolt, side flap hinge to soft top compartment lid

*BA77.33-P-1007-02A

7

Remove side flap for soft top (2)

8

Install in the reverse order

9

Adjust side flap for soft top (2)

Mechanical soft-top components

Number

Designation

Model 217.4

BA77.33-P-1007-02A

Bolt, side flap hinge to soft top compartment lid

Nm

10

Referenced documents