P77.33-2099-06
1 Plug connection
2 Bolts
3 Right soft top lock
4 Right shims
5 Plug connection
6 Bolts
7 Left soft top lock
8 Left shims
S84/11 Left soft top "locked" limit switch
S84/18 Soft top limit switch in catch position
P77.33-2147-01
Dimensions:
a 1mm
| Remove/install | ||
1 | Completely open soft top | ||
2 | Remove paneling from windshield at top | ||
3 | Disconnect connector (5) from left soft top locked limit switch (S84/11) | Installation: Check dimension (a) on left soft top locked limit switch (S84/11) to operating lever and adjust, if applicable, by moving left soft top lock (7) when soft top is locked. | |
4 | Remove bolts (6) from left soft top lock (7) | The left soft top lock (7) and right soft top lock (3) should only be replaced one after another Installation: Install left soft top lock (7) and position bolts (6) loosely Close soft top and align left soft top lock (7) on soft top, then tighten bolts (6) | |
Bolt, lock bottom section to windshield frame | |||
5 | Remove left soft top lock (7) left shims (8) | ||
6 | Remove bolts (2) from right soft top lock (3) | The left soft top lock (7) and right soft top lock (3) should only be replaced one after another Installation: Install right soft top lock (3) and position bolts (2) loosely Close soft top and align right soft top lock (3) on soft top, then tighten bolts (2). | |
Bolt, lock bottom section to windshield frame | |||
7 | Remove right soft top lock (3) with right shims (4) | ||
8 | Install in the reverse order |
Soft top mechanical components
Referenced documents
- ar6830p4250qa Remove/install paneling at top of windshield