ar7730p3360qa

Remove/install front soft top seal to front door side window

Type ar · topic 77.30 · version 0104 · 2018-09-13

Applies to: Model 207.4, 209.4

Where it sits

Function group 3 Body › 77 Sliding roof, soft top, top attachments › 77.30 Vario roof, soft top - complete — Series 207 (models 4**) · Series 209 (models 4**)

EinPAS 38 Roof system › 38.20 Soft top/coupé roof/vario roof › 38.20.30 Soft top/soft top frame — Series 207 (models 4**) · Series 209 (models 4**)

AR77.30-P-3360QA

Remove/install front soft top seal to front door side window

12.09.2018

Model

207.4, 209.4

Remove/install front soft top seal to front door side window

P77.30-2604-09

Shown on model 209.4 on front seal (1)

1

Front seal

2

Convenience seal

3

Center seal

Remove/install

1

Open soft top

Installation: Close soft top only after installing sealing reinforcement.

Soft top in assembly position, see figure.

2

Pull front seal (1) out of roof frame clamping duct.

Installation: Coat front seal (1) with lubricant before installing. Press front seal (1) into roof frame clamping channel.

Lubricant, rubber assembly 1 l

*BR00.45-Z-1010-06A

3

Pull comfort seal (2) out of roof frame clamping channel.

Installation: Coat comfort seal (2) with lubricant before installing. Slide comfort seal (2) into roof frame clamping channel.

Lubricant, rubber assembly 1 l

*BR00.45-Z-1010-06A

4

Install in the reverse order

5

Install sealing reinforcement in front seal (1) and center seal (3)

Model 207.4
Only when replacing front seal (1) and center seal (3).

AR77.30-P-3360-01QA

Repair materials

Number

Designation

Order number

BR00.45-Z-1010-06A

Lubricant, rubber assembly 1 l

A 000 989 03 67

Referenced documents