ar7725p2000lca

Remove, install draft stop

Type ar · topic 77.25 · version 0101 · 2018-05-07

Applies to: Model 217.4

Where it sits

Function group 3 Body › 77 Sliding roof, soft top, top attachments › 77.25 Wind deflector (spoiler) — Series 217 (models 4**)

EinPAS 38 Roof system › 38.20 Soft top/coupé roof/vario roof › 38.20.50 Draft stop/wind deflector — Series 217 (models 4**)

AR77.25-P-2000LCA

Remove, install draft stop

25.04.2018

Model

217.4

Remove, install draft stop

P77.25-2097-09

1

Draft stop

4

Cover

2

Electrical connectors

5

Bolts

3

Electrical connector

Remove, install draft stop

6

Bolts

7

Seat backrest

P77.25-2096-06

Warning

Risk of injury during testing and repair operations related to pyrotechnical components

Do not expose pyrotechnical component parts to temperatures above 100 °C or 212 °F. Disconnect current supply when working on such component parts.

AS91.00-Z-0008-01A

Caution

Risk of injury caused by scraping or cutting body parts on sharp vehicle parts

Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.
Deburr repair panels.

AS00.00-Z-0017-01A

Remove/install

1

Remove rear wall paneling

AR68.30-P-4750LCA

2

Screw on trunk partition


If trunk partition is not screwed on correctly
If soft top is damaged.

Ensure that trunk divider is screwed on, because soft top will be opened again.

3

Remove screw/bolts (5)

4

Unclip cover (4) upward and remove

5

Unclip electrical connection (3) and disconnect

6

Unclip electrical connectors (2) and disconnect

7

Open soft top

8

Remove backrest (7)

AR91.12-P-1620LF

9

Remove screw/bolts (6)

10

Remove draft stop (1) upward

11

Install in the reverse order

Referenced documents