Remove/install front fixed element of panoramic sliding sunroof

AR77.21-P-0803MEC

Remove/install front fixed element of panoramic sliding sunroof

17.02.2020

Model

167.3

with code 413 (Panoramic sliding sunroof/glass roof)

1

Seal

3

Seal

2

Seal

4

Stationary front element

 Warning

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

No parts of the body or limbs should be within the operating area when the components are moving.

AS00.00-Z-0011-01A

Topical note

Notes on removal/installation of bonded elements of panoramic roof

AH77.21-P-0001-01A



Remove

1

Remove drip rails.

AR88.80-P-4000ME

2

Fully open panoramic sliding sunroof.

3

Open side window in driver door.

 So that the freshly glued in front fixed element (4) of panoramic sliding sunroof is not pressed outwards due to the air pressure when doors are closed.

4

Switch off ignition and store transmitter key outside of transmitter range (min. 2 m).

5

Remove seals (2, 3).

AR77.21-P-0560MEC

6

Fix in place seal (1) on windshield.

7

Mask off adjacent paint surfaces with tape.

 Warning

Risk of injury due to snapping or warming up of cutting wire and due to splinters when cutting out glued panoramic roofs

Wear cut-proof gloves and safety glasses.

AS77.21-Z-0002-01A

8

Cut out front fixed element (4) of panoramic sliding sunroof.

AR77.21-P-0803-01ME

 Aid of helper required.

 Set of shields

*222589013100

9

Prepare body flange for front fixed element (4) of panoramic sliding sunroof for installation.

AR77.21-P-0803-03ME

 Use only primer fillers and primer sticks approved by Daimler AG:
https://xentry.i.daimler.com



Install

10

Prepare front fixed element (4) of panoramic sliding sunroof for installation.

AR77.21-P-0803-02ME

 Aid of helper required.

Distance between top edge of window and front edge of roof

*BE67.10-A-1001-02A

Adhesive fabric tape

*BR00.45-Z-1062-02A

 Feeler gauge

*129589032100

11

Apply adhesive material for front fixed element (4) of panoramic sliding sunroof.

AR77.21-P-0803-04ME



000 588 00 72 00 Sealing and corrosion protection gun

WS97.00-P-0001B

 Observe the manufacturer's specifications for the curing time of the adhesive material.

 Adapter

*000589866300

12

Install front fixed element (4) of panoramic sliding sunroof.

AR77.21-P-0803-05ME

13

Install seals (2, 3).

AR77.21-P-0560MEC

14

Install drip rails.

AR88.80-P-4000ME

Concluding tasks

15

Normalize panoramic sliding sunroof with diagnostic system and perform teach-in run for automatic reversing function.



AD00.00-P-2000-06ME

Windshield

Number

Designation

Model 167.3

BE67.10-A-1001-02A

Distance between top edge of window and front edge of roof

Dimension "A"

mm

3 (+1/-0,5)

Repair materials

Number

Designation

Order number

BR00.45-Z-1062-02A

Adhesive fabric tape

A 007 989 28 85