AR77.21-P-0100RT | Remove/install panoramic roof wind deflector | 9.5.05 |
MODEL 251 with CODE (413) Panoramic glass roof with top sliding roof
P77.21-2053-09
1 Wind deflector
2 Clip pins
3 Clip pins
4 Spacer washer
5 Bolts
P77.21-2054-07
1 Wind deflector
2 Clip pins
3 Clip pins
5 Bolts
| Remove/install | ||
Danger! | Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof. | When moving components, ensure that no body parts or limbs are within the operating range of moving parts. | |
1 | Open front glass roof | See Operator's Manual | |
Front roller sun blind retracted | |||
2.1 | Unscrew bolts (5) and remove spacer washer (4) | If spacer washer is installed. | |
Installation of previously removed wind deflector: Position spacer washer (4) between wind deflector and body (arrow). Observe positioning pins for spacer washer on wind deflector. | |||
Installation when replacing wind deflector: Spacer washer (4) between wind deflector and body eliminated | |||
Bolts, wind deflector to panoramic roof frame | |||
2.2 | Unscrew bolts (5) | If spacer washer is not installed. | |
Bolts, wind deflector to panoramic roof frame | |||
3 | Slightly lift wind deflector (1) and remove clip pins (2, 3) | Do not bend clip pins.Replace bent clip pins. | |
Installation: Ensure that clip pins are arrested correctly. | |||
4 | Carefully remove wind deflector from panoramic roof frame | Do not soil headliner. | |
5 | Install in the reverse order |
Panoramic roof
Referenced documents
- as0000z001101a Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.