AR77.20-W-0010H | Remove, install sliding roof | 20.9.11 |
MODEL 963 with CODE (D8M) Sliding roof
MODEL 964 with CODE (D8M) Sliding roof
W68.30-1167-11
1 Cover
2 Center curtain rail
W77.20-1017-08
3 Cover frame
4 Grab handle
5 Connector
A912 Sliding roof control unit
M12 Sliding roof motor
6 Connector
7 Sliding roof
| Remove/install | ||
Danger! | Risk of injury caused by fingers being pinched or crushed when removing, installing or aligning hoods, doors, trunk lids, liftgates or sliding roof | Keep body parts and limbs well clear of moving parts. | |
1 | Switch off ignition | ||
2 | Remove cover (1) | ||
3 | Remove center curtain rail (2) | ||
4 | Unscrew bolts from support rod (4) | | |
5 | Remove cover frame (3) together with support rod (4) | Pulling hook | |
6 | Disconnect connector (5) from sliding roof control unit | The sliding roof (7) can be in any position. | |
Installation: Close sliding roof (7) electrically, momentarily release sliding roof/pop-up roof button, reactuate for longer than 5 s and release again. Now check sliding roof (7) for proper function. | |||
7 | Remove sliding roof (7) | | |
8 | Install in the reverse order |
Grab handle
Number | Designation | Model | ||
BA68.70-N-1003-01B | Bolt, support rod to sliding roof or pop-up roof | Nm | 18 | |
Electric sliding roof
Extraction hook
655 589 07 63 00
Referenced documents
- as0000z001101a Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.