ar7720p2500e

Removing and installing wind deflector

Type ar · topic 77.20 · version 0204 · 2004-10-21

Applies to: MODEL 202 with CODE (412b) Electric sliding/pop-up roof with CODE (414a) Electric glass sliding/pop-up roof MODEL 210 with CODE (414a) Electric glass sliding/pop-up roof MODEL 215 with CODE (414a) Electric glass sliding/pop-up roof MODEL 220 with CODE (414a) Electric glass sliding/pop-up roof

Where it sits

Function group 3 Body › 77 Sliding roof, soft top, top attachments › 77.20 Electric sliding roof — Series 202 · Series 210 · Series 215 · Series 220

EinPAS 38 Roof system › 38.15 Sliding roof/panoramic sliding sunroof › 38.15.33 Paneling/sliding roof panel — Series 202 · Series 210 · Series 215 · Series 220

AR77.20-P-2500E

Removing and installing wind deflector

9.2.95

MODEL 202
with CODE (412b) Electric sliding/pop-up roof
with CODE (414a) Electric glass sliding/pop-up roof

MODEL 210 with CODE (414a) Electric glass sliding/pop-up roof

MODEL 215 with CODE (414a) Electric glass sliding/pop-up roof

MODEL 220 with CODE (414a) Electric glass sliding/pop-up roof

Removing and installing wind deflector

P77.20-0259-06

1 Wind deflector

2 Leaf spring

3 Seal

4 Vertical stop

5 Retaining lug model 202

6 Retaining lug model 210

Revisions

7.2.95

Procedure revised

Observe item (2.1)

Removal, installation

1

Open sliding roof

2

Press wind deflector (1) down on one side, twist upward in direction of arrow on opposite side out of cutout for sliding roof until wind deflector (1) can be unhooked.

On previous version wind deflectors without vertical stop (4)

2.1

Press wind deflector (1) inward until vertical stop (4) is free, turn upward slightly in direction indicated by arrow and unhook.

Do not break off retaining lug (5 or 6)

3

Reinstall in opposite order