Remove, install tilting/sliding roof cutout seal

Type ar · topic 77.20 · version 0107 · 2012-04-17

Applies to: MODEL 463.220 /221 /222 /224 /225 /227 /228 /230 /231 /232 /233 /240 /241 /243 /244 /245 /246 /247 /248 /249 /270 /271 /320 /321 /322 /323 /324 /325 /327 /328 /330 /331 /332 /333 /336 /340 /341 with CODE (D27) Power tilting/sliding roof MODEL 463.236 /237 /346 with CODE (D27) Power tilting/sliding roof up to model year 2013 /model refinement package 2012

AR77.20-P-1900A

22.3.12

MODEL 463.220 /221 /222 /224 /225 /227 /228 /230 /231 /232 /233 /240 /241 /243 /244 /245 /246 /247 /248 /249 /270 /271 /320 /321 /322 /323 /324 /325 /327 /328 /330 /331 /332 /333 /336 /340 /341 with CODE (D27) Power tilting/sliding roof

MODEL 463.236 /237 /346
with CODE (D27) Power tilting/sliding roof
up to model year 2013
/model refinement package 2012

Remove, install tilting/sliding roof cutout seal

P77.20-0295-06

1 Sealing

2 Front retaining rail

3 Left retaining rail

4 Right retaining rail

5 Rear retaining rail

6 Screw

7 Screw

8 Screw

 	Remove/install
1	Fully open tilting/sliding roof
2	Mark installation position of seal (1) on roof cutout and connection points (arrows)
3	Remove sealing (1)	 Installation: Press seal (1) into retaining rails (2, 3, 4, 5). Connection points (arrows) on seal (1) should coincide with the markings on the roof cutout. The corrugation on the insert profile should point upward.
4	Install in the reverse order