AR77.20-P-1850E | Removing and installing control unit for sliding roof drive | 30.11.94 |
MODEL 202 up to 31.5.97
with CODE (412b) Electrically operated tilting/sliding roof
with CODE (414a) Electrically operated glass tilting/sliding roof
MODEL 210 up to 28.2.97 with CODE (414a) Electrically operated glass tilting/sliding roof
P77.20-0223-06
1 Control unit
2 Screw
3 Gear housing
4 Control gear
5 Triangle on control gear
6 Triangle on gear housing
7 Gear
8 Spacer
9 Connector
M12/1k1 Tilting/sliding roof relay
M12/1m1 Tilting/sliding roof motor
| Removal | ||
1 | Close tilting/sliding roof | ||
2 | Remove front dome lamp (E15/2) | Model 202 | |
Model 210 | |||
3 | Remove sliding roof drive | ||
4 | Unscrew screw (2) in control unit (1) | ||
5 | Unclip catches (arrows) | ||
6 | Pull off control unit (1) | When pulling, hard to move in area of connector (9) | |
| Installation | ||
1 | Turn punched triangle (5) on control gear (4) to coincide with punched triangle (6) on gear housing (3) with help of Allen wrench (12 o'clock position). | ||
2 | Press on control unit (1) | Catch lugs should engage audibly | |
3 | Screw in screw (2) | ||
4 | Connect sliding roof drive | ||
5 | Press tilting/sliding roof switch (S13/2) forward in closing direction until sliding roof motor stops running | ||
6 | Install sliding roof drive | ||
7 | Install front dome lamp | Model 202 | |
Model 210 | |||
8 | Check for proper function |
Referenced documents
- ar7720p1800e Removing and installing sliding roof drive
- ar8220p0110e Removing and installing front dome lamp
- ar8220p0110f Removing and installing front dome lamp