Remove/install pop-up bracket on tilting/sliding roof

AR77.20-P-1700A

Remove/install pop-up bracket on tilting/sliding roof

22.3.12



Removing

1

Remove paneling from tilting/sliding roof

AR77.20-P-0500G

2

Remove tilting/sliding roof panel

AR77.20-P-1000A

3

Remove guide plate (1) from sliding carrier (2)

4

Remove mounting bracket from tilting/sliding roof panel (4)

 Remove upward out of side guide (gate).

5

Remove water drain runnel

AR77.20-P-1999A

6

Remove sliding carrier (2)

7

Remove tilting bracket (5)

 Slide tilting bracket (5) to stop toward front, tilt upward and remove toward inside at an angle.



Install

8

Grease tilting bracket (5) on sliding jaws (7) and moving parts with lubricant

*BR00.45-Z-1004-06A

9

Install tilting bracket (5)

 Ensure that sliding jaws (7) are seated properly, otherwise malfunctions can occur.

10

Install sliding carrier (2)

 Press tilting bracket (5) slightly outwards with screwdriver, then tighten bolts on sliding carrier (2).

11

Install water drain runnel

AR77.20-P-1999A

12

Adjust basic position on tilting bracket mechanism

 Insert left and right adjustment gauges (6) into side guide (gate) and into groove in tilting bracket (5) (arrows).

Do not remove adjustment gauges (6) until tilting/sliding roof panel is installed.



*124589172100



*124589182100

13

Install mounting bracket for tilting/sliding roof panel (4)

14

Screw guide plate (1) to sliding carrier (2)

15

Install tilting/sliding roof panel

AR77.20-P-1000A

16

Remove left and right adjustment gauges (6)



*124589172100



*124589182100

17

Actuate tilting/sliding roof and move to all positions a number of times

18

Close tilting/sliding roof and check markings (8) and marking notches (9) at left and right sliding rail

 If the marking (8) is outside the marking notches (9) on the slide rail, see:



Remove paneling from rear pillar.

 Only on left side.

MODEL 463.220 /221 /224 /225 /227 /228 /230 /231 /232 /233 /240 /241 /320 /321 /324 /325 /327 /328 /330 /331

Model 463.222 /237 /243 /244 /245 /246 /247 /249 /270 /271 /322 /323 /332 /333 /336 /340 /341 /346

Model 463.236 /248

AR68.30-P-4505GK

Carry out fine adjustment of tilting/sliding roof

AR77.20-P-1100-02A

19

Carry out function check

20

Install paneling on tilting/sliding roof

AR77.20-P-0500G

21

Install paneling on rear pillar

 Only if paneling was removed.

Model 463.220 /221 /224 /225 /227 /228 /230 /231 /232 /233 /240 /241 /320 /321 /324 /325 /327 /328 /330 /331

Model 463.222 /237 /243 /244 /245 /246 /247 /249 /270 /271 /322 /323 /332 /333 /336 /340 /341 /346

Model 463.236 /248

AR68.30-P-4505GK

Number

Designation

Order number

BR00.45-Z-1004-06A

Synthetic grease, sliding roof 500 g, DB supply specification 6827.60

A 001 989 46 51