AR77.20-P-1410A | Remove/install guide tube for sliding/pop-up roof control cable | 18.11.96 |
MODEL 463.220 /221 /224 /225 /227 /228 /230 /231 /232 /233 /240 /241 /320 /321 /324 /325 /327 /328 /330 /331 with CODE (D27) Power sliding/pop-up roof
P72.20-0300-01
1 Edge protection
2 Paneling for left rear door pillar
P68.30-0414-01
P77.20-2220-01
3 Guide pipe
4 Fixing clamp
5 Sliding/pop-up roof frame
P77.20-2257-01
| Remove, Install | ||
1 | Remove left edge protection (1) from rear door pillar | ||
2 | Remove left paneling (2) from rear door pillar | ||
3 | Remove paneling from sliding/pop-up roof | ||
4 | Remove sliding/pop-up roof control cable | ||
5 | Remove passenger compartment side wall paneling | Only on left side. | |
6 | Loosen roof cover on left side and carefully press downward | ||
7 | Unscrew guide tube (3) from sliding/pop-up roof frame (5) | ||
8 | Unscrew pipe clamp from left rear door pillar | ||
9 | Remove guide tube (3) from motor (arrow) | Installation: When installing ensure that bead on pipe slides into groove on gear. | |
10 | Remove guide tube | Installation: The guide tube (3) for the control cable should not be bent when installing, otherwise the control cable will stick | |
11 | Install in the reverse order | ||
12 | Check for proper function |
Referenced documents
- ar6830p4300g Remove/install headliner
- ar7720p0500g Remove/install paneling on tilting/sliding roof
- ar7720p1400a Remove/install rebound