ar7720p1400t

Remove/install rebound

Type ar · topic 77.20 · version 0104 · 2006-12-19

Applies to: MODEL 211.0 /2, 240.0 with CODE (414) Power glass tilting/sliding roof

Where it sits

Function group 3 Body › 77 Sliding roof, soft top, top attachments › 77.20 Electric sliding roof — Series 211 (models 0**, 2**) · Series 240 (models 0**)

EinPAS 38 Roof system › 38.15 Sliding roof/panoramic sliding sunroof › 38.15.30 Drive unit — Series 211 (models 0**, 2**) · Series 240 (models 0**)

AR77.20-P-1400T

Remove/install rebound

7.12.06

MODEL 211.0 /2, 240.0 with CODE (414) Power glass tilting/sliding roof

Remove/install rebound

P77.20-2308-09

Shown on model 211.0

1 Water drain channel

5 Cover

6 Bolts

7 Cable

2 Long wedge

3 Bolt

4 Tilting bracket

Remove/install

1

Remove tilting/sliding roof panel

AR77.20-P-1000T

2

Remove overhead control panel control unit

Leave mounts on tilting/sliding roof panel in tilt position

Model 211.0/2

AR82.20-P-1000T

Model 240.0

AR82.20-P-1000H

3

Remove tilting/sliding roof motor

Installation: Before installing tilting/sliding roof motor, slide tilting bracket (4) toward front to stop.

AR77.20-P-3010T

4

Remove rain trough (1) with long wedge (2).

*115589035900

5

Unscrew screw (3) from rebound (7) on tilting bracket (4) on both sides

6

Push tilting bracket (4) approx. 6 cm to rear on both sides

7

Unscrew bolts (6) from cover (5) on both sides, remove cover (5) upward on both sides.

8

Slide rebound (7) approx. 10 cm toward rear on both sides.

9

Remove rebound (7) from slide rail on both sides and pull out toward rear

Carefully pull out rebound (7), otherwise paint can be damaged.

10

Install in the reverse order

Remove/install rebound

Long wedge

115 589 03 59 00

Referenced documents