ar7720p1400q

Remove/install control cable

Type ar · topic 77.20 · version 0101 · 2003-02-28

Applies to: MODEL 209.3 with CODE (414a) Electric glass sliding/pop-up roof

Where it sits

Function group 3 Body › 77 Sliding roof, soft top, top attachments › 77.20 Electric sliding roof — Series 209 (models 3**)

EinPAS 38 Roof system › 38.15 Sliding roof/panoramic sliding sunroof › 38.15.30 Drive unit — Series 209 (models 3**)

AR77.20-P-1400Q

Remove/install control cable

10.10.01

MODEL 209.3 with CODE (414a) Electric glass sliding/pop-up roof

Remove/install control cable

P77.20-2296-09

1 Bolt

2 Bolts

3 Cover

6 Lever

7 Tip

4 Tilting bracket

5 Cable

Remove/Install

Danger!

Risk of injury to fingers being jammed or squeezed when removing and installing or aligning hoods, doors, trunk lid/tailgate or sliding roof.

When moving components, ensure that no body parts or limbs are within the operating range of moving parts.

AS00.00-Z-0011-01A

1

Remove water drain funnel

AR77.20-P-1999Q

2

Remove sliding roof drive

Installation: Displace tilting bracket (4) until the edge of lever (6) is matched with tip (7), then install sliding roof drive.

AR77.20-P-1800Q

3

Unscrew screws (1)

4

Unscrew screw (2)

5

Remove cover (3)

6

Push tilting bracket (4) approx. 10 cm toward rear.

7

Pull out control cable (5) toward rear

8

Install in the reverse order

9

Check for proper function

Referenced documents