Remove/install rebound · ar7720p1400ha · Mercedes-Benz WIS

AR77.20-P-1400HA

Remove/install rebound

7.12.06

MODEL 240.1 with CODE (418) Glass tilting/sliding roof in rear
Rebound for sliding roof lining

P77.20-2411-07

3 Bolt

4 Roof crossbeam

M12/5 Sliding roof lining drive unit

5 Bolt

P77.20-2410-06

Shown on removed tilting/sliding roof frame

1 Operating cable

2 Slide rail

6 Guide tube

7 Bolts

8 Angle bracket

9 Bolt

10 Sliding roof lining drive unit

	Remove/install
1	Remove paneling from tilting/sliding roof		AR77.20-P-0500H
2	Remove rear headliner		AR68.30-P-7608HA
3	Unscrew bolts (3) and fold roof crossbeam (4) downward.	 Allow roof crossbeam (4) to hang down on electric wiring harnesses.
4	Unscrew bolts (5) and loosen sliding roof lining drive unit (M12/5) from sliding roof lining drive unit (10).	Allow sliding roof lining drive unit (M12/5) to hang down on electric wiring harness.
			*BA77.20-P-1007-01A
5	Slide left and right operating cable (1) toward rear, out of guide tube (6).	 The operating cable (1) should no longer engage in the guide tube (6).
		 Installation: Slide left and right operating cable (1) toward front to stop.
6	Remove bolts (7)
7	Unscrew bolts (9) on left and right angle bracket (8) and remove angle bracket (8).
8	Remove guide tube (6) on left and right from sliding rail (2).
9	Remove left and right operating cable (1) toward front from sliding rail (2).
10	Install in the reverse order
11	Perform teach-in run for sliding roof anti-pinch protection
	Connect STAR DIAGNOSIS and read out fault memory		AD00.00-P-2000-04A

 Electric sliding roof