Remove/install cable

AR77.20-P-1400H

Remove/install cable

28.4.03

 

Remove/Install

1

Remove tilting/sliding roof cover

AR77.20-P-1000T

2

Remove roof crossbeam paneling.

AR68.30-P-7606HA

3

Unscrew bolts (3) and fold roof crossbeam (2) downwards

 Allow roof crossbeam (2) to hang on electric wiring harnesses

4

Unscrew bolts (4) from tilting/sliding roof drive (SR) (M12) and remove tilting/sliding roof drive (SR) (M12)

 Allow tilting/sliding roof drive (SR) (M12) to hang on electric wiring harness

*BA77.20-P-1002-01A

 Installation: Before installing tilting/sliding roof drive (SR) (M12) slide tilting bracket (7) toward front to stop.

5

Unclip rain trough (5) on left and right with from tilt bracket (7) with long wedge and remove



*115589035900

6

Unscrew bolt (8) on left and right

 The control cable (1) is separated from the tilt bracket (7)

7

Move left and right tilt bracket (7) until bolts (8) are accessible

8

Unscrew bolts (9) from left and right cover (10) and unclip cover (10) upward with long wedge



*115589035900

9

Pull left or right control cable (1) out of sliding rail toward rear

 Carefully pull out left or right control cable (1), otherwise paint can be damaged.

10

Install in the reverse order

Number

Designation

Model 240

BA77.20-P-1002-01A

Bolt to sliding roof drive

Torx

NM

4

Hexagon socket

NM

-