ar7720p1400gw

Remove/install cable

Type ar · topic 77.20 · version 0101 · 2019-04-18

Applies to: Model 463 (except 463.202) up to model year 2019

Where it sits

Function group 3 Body › 77 Sliding roof, soft top, top attachments › 77.20 Electric sliding roof — Series 463 (models 200, 204, 206, 207, 208, 209, 210, 215, 218, 220, 221, 222, 224, 225, 227, 228, 230, 231, 232, 233, 234, 235, 236, 237, 238, 239, 240, 241, 242, 243, 244, 245, 246, 247, 248, 249, 250, 254, 255, 260, 261, 270, 271, 272, 273, 274, 275, 276, 277, 280, 300, 303, 304, 306, 307, 308, 309, 315, 318, 320, 321, 322, 323, 324, 325, 327, 328, 330, 331, 332, 333, 335, 336, 338, 340, 341, 342, 343, 346, 348, 349, 350)

EinPAS 38 Roof system › 38.15 Sliding roof/panoramic sliding sunroof › 38.15.30 Drive unit — Series 463 (models 200, 204, 206, 207, 208, 209, 210, 215, 218, 220, 221, 222, 224, 225, 227, 228, 230, 231, 232, 233, 234, 235, 236, 237, 238, 239, 240, 241, 242, 243, 244, 245, 246, 247, 248, 249, 250, 254, 255, 260, 261, 270, 271, 272, 273, 274, 275, 276, 277, 280, 300, 303, 304, 306, 307, 308, 309, 315, 318, 320, 321, 322, 323, 324, 325, 327, 328, 330, 331, 332, 333, 335, 336, 338, 340, 341, 342, 343, 346, 348, 349, 350)

AR77.20-P-1400GW

Remove/install cable

02.04.2019

Model

463 (except 463.202)

up to model year 2019

Remove/install cable

1

Screws

2

Guide plate

3

Guide tube

4

Operating cable

P77.20-2790-05

Remove

1

Remove trim from tilting/sliding roof


Model 463 (except 463.202)
as of model year 2013 up to model year 2019

AR77.20-P-0500GW

2

Remove screws (1)

3

Open guide plate (2) (see arrows) and remove from operating cable guide (4)

4

Actuate switch to open

Remove/install paneling on rear pillar
Model 463 (except 463.202)
as of model year 2013 up to model year 2019

AR68.30-P-4505GW

Allow operating cable (4) to extend from the transmission. If it is not possible to move the operating cable (4) with the electric drive, the emergency crank must be used:

Operating the emergency crank:
Pull the emergency crank out completely and then push approx. 3 to 4 mm back in.

5

Pull the operating cable (4) out towards the front

Disassemble the transmission of the electric drive.

Remove/install guide tube for tilting/sliding roof control cableModel 463 (except 463.202)
as of model year 2013 up to model year 2019

AR77.20-P-1410GW

If it is not possible to remove the operating cable (4):

If it is not possible to remove the operating cable (4) after disassembly of the electric drive:

Install

6

Install guide tube (3) of the operating cable (4)

Remove/install guide tube for tilting/sliding roof control cable
Model 463 (except 463.202)
as of model year 2013 up to model year 2019

AR77.20-P-1410GW

7

Assemble the transmission of the electric drive.

8

Coat the end of the new operating cable (4) with lubricating paste

Synthetic grease, sliding roof 500 g, DB supply specification 6827.60

*BR00.45-Z-1004-06A

9

Insert operating cable (4) into guide tube (3) completely

10

Attach guide plate (2) to operating cable (4) and press them together

11

Insert operating cable (4) into guide tube (3) completely

12

Set tilting/sliding roof switch to "Lower roof"

Retract operating cable (4) into the transmission until the holes in the guide plate (2) and in the transport bridge overlap.

13

Tighten guide plate (2) on transport bridge

14

Close tilting/sliding roof

Adjust

15

Carry out basic setting of operating cable (4) on roof system motor (M12m1) and check closing of tilting/sliding roof


Model 463 (except 463.202)
up to model year 2019
with code D27 (Electric tilting/sliding glass sunroof)

AR77.20-P-1100-05A

Centering bolts for sliding roof

WF58.50-P-7720-01A

Model 463 (except 463.202)
up to model year 2019
with code D27 (Electric tilting/sliding glass sunroof)

AR77.20-P-1100-02A

If the tilting/sliding roof does not close exactly after this setting work:

16

Carry out function check

Install

17

Install paneling on rear pillar


Model 463 (except 463.202)
as of model year 2013 up to model year 2019

AR68.30-P-4505GW

18

Install trim on tilting/sliding roof


Model 463 (except 463.202)
as of model year 2013 up to model year 2019

AR77.20-P-0500GW

Repair materials

Number

Designation

Order number

BR00.45-Z-1004-06A

Synthetic grease, sliding roof 500 g, DB supply specification 6827.60

A 001 989 46 51

Referenced documents