ar7720p1400ak

Remove/install cable

Type ar · topic 77.20 · version 0102 · 2010-03-26

Applies to: MODEL 169.0 /3, 245.2 with CODE (417) Lamella roof

Where it sits

Function group 3 Body › 77 Sliding roof, soft top, top attachments › 77.20 Electric sliding roof — Series 169 (models 0**, 3**) · Series 245 (models 2**)

EinPAS 38 Roof system › 38.15 Sliding roof/panoramic sliding sunroof › 38.15.30 Drive unit — Series 169 (models 0**, 3**) · Series 245 (models 2**)

AR77.20-P-1400AK

Remove/install cable

16.3.10

MODEL 169.0 /3, 245.2 with CODE (417) Lamella roof

Remove/install cable

P77.20-2489-09

1 Cable

2 Sliding rail

5 Coupling

3 Screwdriver

4 Guide rail

Remove/Install

1

Remove lamella roof drive

AR77.20-P-1810AK

2

Remove guides for lamellas on lamella roof

Remove guides only on side of lamella roof of which cable (1) is removed.

AR77.20-P-1710AK

3

Completely slide slider (2) with suitable screwdriver (3) into guide rail (4) in direction of arrow toward rear and remove from guide rail (4)

Installation: Apply lubricant to slider (2).Ensure that slider (2) is seated correctly on coupling (5)

Lubricant

*BR00.45-Z-1004-06A

4

Unclip coupling (5) from cable (1)

Installation: Apply lubricant to coupling (5).Ensure that coupling (5) is seated properly on cable (1)

Lubricant

*BR00.45-Z-1004-06A

5

Pull cable (1) out of guide rail (4) toward rear

Installation: Clean guide rail (4) before installing cable (1).Apply lubricant to cable (1) and guide rail (4).

Lubricant

*BR00.45-Z-1004-06A

6

Install in the reverse order

Repair materials

Number

Designation

Order number

BR00.45-Z-1004-06A

Synthetic grease, sliding roof 500 g, DB supply specification 6827.60

A 001 989 46 51

Referenced documents