ar7720p1000rt

Remove/install tilting/sliding roof cover

Type ar · topic 77.20 · version 0100 · 2005-05-17

Applies to: MODEL 251 with CODE (414) Power glass tilting/sliding roof

Where it sits

Function group 3 Body › 77 Sliding roof, soft top, top attachments › 77.20 Electric sliding roof — Series 251

EinPAS 38 Roof system › 38.15 Sliding roof/panoramic sliding sunroof › 38.15.33 Paneling/sliding roof panel — Series 251

AR77.20-P-1000RT

Remove/install tilting/sliding roof cover

26.10.04

MODEL 251 with CODE (414) Power glass tilting/sliding roof

Remove/install tilting/sliding roof cover

P77.20-2536-10

1 Tilting/sliding roof cover

Remove/install tilting/sliding roof cover

P77.20-2520-01

2 Bolts

Remove/Install

Danger!

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

When moving components, ensure that no body parts or limbs are within the operating range of moving parts.

AS00.00-Z-0011-01A

1

Remove tilting/sliding roof rubber bellows

AR77.20-P-1150RT

2

Close tilting/sliding roof

3

Loosen screw (2)

Left and right side

Installation: Use new bolts.

4

Remove tilting/sliding roof cover (1)

Note installation position.

5

Install in the reverse order

6

Adjust tilting/sliding roof cover (1)

AR77.20-P-1100RT

7

Check tilting/sliding roof for proper function

Referenced documents