ar7229s8780e

Remove/install electric sliding door closing assist motor

Type ar · topic 72.29 · version 0101 · 2015-12-09

Applies to: Model 447.7/8, 448.8 with code T55 (Electric operation of sliding door on right) Model 447.7/8, 448.8 with code T56 (Electric operation of sliding door on left)

Where it sits

Function group 3 Body › 72 Doors › 72.29 Doors - electrical system — Series 447 (models 7**, 8**) · Series 448 (models 8**)

EinPAS 29 Drive authorization/security system › 29.16 Locking/unlocking › 29.16.31 Actuator motor/actuator — Series 447 (models 7**, 8**) · Series 448 (models 8**)

AR72.29-S-8780E

Remove/install electric sliding door closing assist motor

25.11.2015

Model	447.7/8, 448.8
	with code T55 (Electric operation of sliding door on right)
Model	447.7/8, 448.8
	with code T56 (Electric operation of sliding door on left)

Remove/install electric sliding door closing assist motor

Remove/install electric sliding door closing assist motor

Remove/install electric sliding door closing assist motor

S72.16-4627-01

S72.16-4622-01

S72.29-4535-01

1	Bolts
2	Door lock
M76/1	Right sliding door closing assist actuator
M76/2	Left sliding door closing assist actuator

3	Bolts
4	Cable

5	Sliding door
6	Electrical connector

 Danger !	Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.	No parts of the body or limbs should be within the operating area when the components are moving.	AS00.00-Z-0011-01A
	Notes on carrying out repair work in the vehicle interior		AH68.00-N-0001-01S
 	Remove/install
1	Remove door trim from corresponding sliding door (5)		AR72.16-S-6610E
2	Remove sliding door trim
3	Remove bolts (1)	 Screw/bolt, door lock to door	*BA72.16-N-1010-01J
4	Remove bolts (3)
5	Remove door lock (2) together with right sliding door closing assist actuator (M76/1) or left sliding door closing assist actuator (M76/2)	 It is not necessary to disconnect the electrical connectors from the door lock (2).
6	Disconnect electrical connection (6)
7	Remove cable (4) from door lock (2)
8	Install in the reverse order
	Check
9	Check door lock (2) in sliding door (5) for proper function

 Sliding doors

Number	Designation		Model 447, 448
BA72.16-N-1010-01J	Screw/bolt, door lock to door	Nm	10

Referenced documents

ah6800n000101s Notes on carrying out repair work in the vehicle interior
ar7216s6610e Remove/install door panel of sliding door
as0000z001101a Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.