ar7229p1000rt

Remove/install front door control unit

Type ar · topic 72.29 · version 0200 · 2006-08-16

Applies to: MODEL 251

Where it sits

Function group 3 Body › 72 Doors › 72.29 Doors - electrical system — Series 251

EinPAS 25 On-board/network/multifunction › 25.15 Network/multifunction › 25.15.11 Control unit/module/relay — Series 251

AR72.29-P-1000RT

Remove/install front door control unit

3.8.06

MODEL 251

Remove/install front door control unit

P72.29-2366-06

Shown on vehicle with folding left/right outside mirror, code 500 with automatic dimming inside rearview mirror and outside mirror (driver), code 249

1 Connector

2 Rivets

N69/1 Door control unit front left

N69/2 Door control unit front right

Modification notes

26.7.06

"Disconnect/connect ground line for battery" and "Perform basic programming" eliminated

Steps 2 and 9

Remove/install

Notes on avoiding damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

1

Connect STAR DIAGNOSIS and buffer basic data of left front door control unit (N69/1) or right front door control unit (N69/2)

Only when replacing left front door control unit (N69/1) or right front door control unit (N69/2).

Connect STAR DIAGNOSIS and read out fault memory

AD00.00-P-2000-04A

STAR DIAGNOSIS diagnosis system

*WH58.30-Z-1048-13A

Installation: Transfer buffered basic data to new left front door control unit (N69/1) or right front door control unit (N69/2)

2

Remove speaker from left or right front door

AR82.62-P-7845RT

3

Disconnect connector (1) from left front door control unit (N69/1) or right front door control unit (N69/2)

4

Drill out rivets (2) on left or right front door with dia. 5 mm bit.

Installation: Use dia. 520 mm aluminum rivets with flat round head

Hand riveter

*WH58.30-Z-1003-29A

Cordless drill/driver

*WH58.30-Z-1007-20A

5

Remove left front door control unit (N69/1) or right front door control unit (N69/2)

6

Completely remove rivet residues from left or right front door

Remaining rivet material must be completely removed, otherwise this can cause corrosion damage.

Wet/dry vacuum cleaner

*WE58.40-Z-1005-03A

7

Install in the reverse order

8

Connect STAR DIAGNOSIS, read out fault memory and erase if necessary

STAR DIAGNOSIS diagnosis system

*WH58.30-Z-1048-13A

Connect STAR DIAGNOSIS and read out fault memory

AD00.00-P-2000-04A

Commercially available tools

Number

Designation

WH58.30-Z-1048-13A

STAR DIAGNOSIS diagnosis system, Compact Passenger Car

6511 1801 00

WH58.30-Z-1007-20A

Cordless drill/driver

WH58.30-Z-1003-29A

Hand riveter

Workshop equipment

WE58.40-Z-1005-03A

Wet/dry vacuum cleaner

Referenced documents