ar7229p0130rt

Remove/install automatic rear-end door switch

Type ar · topic 72.29 · version 0100 · 2005-05-17

Applies to: MODEL 251

Where it sits

Function group 3 Body › 72 Doors › 72.29 Doors - electrical system — Series 251

EinPAS 28 Convenience system/driver assistance system › 28.35 Convenience feature › 28.35.12 Sensor/switch/wiring harness — Series 251

AR72.29-P-0130RT

Remove/install automatic rear-end door switch

18.1.05

MODEL 251

Remove/install automatic rear-end door switch

P72.29-2365-07

1 Front door lining

2 Bolt

3 Electrical connector

4 Clip

S15/3 Open and close switch for rear-end door, driver

Remove/Install

1

Remove front door lining (1)

Lay door lining front side down on suitable subsurface to prevent damage!

AR72.10-P-1000RT

2

Separate electrical connection (3)

Treat ribbon cable carefully to prevent damage

3

Unscrew bolt (2).

4

Remove open and close switch for rear-end door, driver (S15/3)

Installation: Ensure that clip (4) is seated correctly.

5

Install in the reverse order

6

Check open and close switch for rear-end door, driver (S15/3) for proper function.

Referenced documents