AR72.25-M-1400A | Remove/install drive swiveling door | 16.11.06 |
MODEL 904.663
Minibus Sprinter Classic
MODEL 904.663
Sprinter Tourist minibus
MODEL 904.663
Sprinter Minibus low corridor
MODEL 905.613
Sprinter Classic 6 t minibus
MODEL 905.613
Sprinter Minibus low corridor 6 t
M72.25-0015-09
1 Bolt
2 Wiring harness
3 Locknut
7 Adjustment shim
8 Control cable
4 Bore
5 Cover
6 Bracket
| Remove/install | ||
Danger! | Risk of injury caused by fingers being pinched or crushed when removing, installing or aligning hoods, doors, trunk lids, tailgates or sliding roof. | Keep body parts and limbs well clear of moving parts. | |
1 | Remove swiveling door | ||
2 | Unscrew counternut (3) from threaded rod on rotating pillar | Counterhold on hole (4) with screwdriver | |
3 | Remove threaded rod upward | ||
4 | Remove cover (5) | ||
5 | Remove Bowden cables (8) from drive | ||
6 | Remove wiring harness (2) from drive | ||
7 | Loosen bolt and turn bracket (6) to side | ||
8 | Unscrew bolts (1) and remove drive with rotating pillar | | |
9 | Install in the reverse order | Installation: Install cover (5) only after adjusting final switchoff. | |
Adjust | |||
10 | Adjust final switchoff by turning adjusting rings (7) | Only when installing new drive. |
Swiveling door
Referenced documents
- ar7225m1000a Remove/install inward folding door
- as0000z001101a Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.