P72.20-2490-06
Shown on vehicle with Keyless Go, code 889
1 Inner handle strip
2 Nuts
3 Outer handle strip
4 Bolts
E19/3 License plate lamp, left rear-end door
E19/4 License plate lamp, right rear-end door
S62/21 Rear-end door Keyless Go button
S88/9 Rear-end door handle switch
| Remove/Install | ||
Danger! | Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof. | When moving components, ensure that no body parts or limbs are within the operating range of moving parts. | |
1 | Remove door lining on rear-end door | ||
2 | Unscrew nuts (2) from inner handle strip (1) | On inside of rear-end door | |
3 | Disconnect electrical connectors on Keyless Go rear-end door button (S62/21) and rear-end door handle switch (S88/9) from inner handle strip (1) | ||
4 | Remove inner handle strip (1) | ||
5 | Unscrew bolts (4) from outer handle strip (3) | On outside of rear-end door | |
6 | Remove outer handle strip (3) | Risk of breakage! Do not scratch paint. | |
7 | Disconnect connector from left rear-end door license plate lamp (E19/3) and right rear-end door license plate lamp (E19/4) | ||
8 | Install in the reverse order |
Referenced documents
- ar7220p3520rt Remove/install rear-end door lining
- as0000z001101a Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.