AR72.20-P-3602RT | Remove/install automatic rear-end door position sensor | 2.8.05 |
MODEL 251 with CODE (890) Automatic rear-end door
P72.20-2526-09
1 Electrical connector
2 Electrical line for position sensor
3 Cover
4 Position sensor
5 Rear position sensor ball socket
P72.20-2527-09
1 Electrical connector
2 Electrical line for position sensor
3 Cover
4 Position sensor
5 Rear position sensor ball socket
6 Right rear-end door hinge
7 Position sensor ball socket
| Remove/install | ||
Danger! | Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof. | When moving components, ensure that no body parts or limbs are within the operating range of moving parts. | |
1 | Remove headliner | With panoramic glass roof with top sliding roof, code 413 | |
With power glass tilting/sliding roof, code 414 | |||
Without panoramic glass roof with top sliding roof, code 413 and without power glass tilting/sliding roof, code 414 | |||
2 | Remove position sensor (4) from right rear-end door hinge (6) | Carefully press off rear position sensor ball socket (5) | |
Installation: Ensure that rear position sensor ball socket (5) is mounted correctly on right rear-end door hinge (6). | |||
3 | Separate electrical connector (1) | ||
4 | Unclip position sensor electrical line (2) from the four brackets (arrows). | ||
5 | Unclip cover (3) from roof frame | ||
6 | Carefully pry position sensor (4) off of position sensor ball socket (7) upward | Installation: Move position sensor (4) to installation position and press down until it arrests correctly on position sensor ball socket (7). | |
7 | -Remove position sensor (4) | Installation: Route position sensor electrical line (2) between roof frame and windowbag to ensure proper function of the windowbag! | |
8 | Install in the reverse order |
Referenced documents
- ar6830p4300rt Remove/install headliner
- ar6830p4300rta Remove/install headliner
- as0000z001101a Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.