AR72.20-P-3600RT | Remove/install gas-operated strut on rear-end door | 3.8.05 |
MODEL 251 with CODE (890) Automatic rear-end door
P72.20-2528-09
1 Front gas-operated strut ball socket
3 Rear gas-operated strut ball socket
2 Gas-operated strut
P72.20-2529-06
Shown on gas-operated strut on left side of vehicle
1 Front gas-operated strut ball socket
2 Gas-operated strut
3 Rear gas-operated strut ball socket
4 Left rear-end door hinge
5 Hydraulic lines
6 Cover
7 Gas-operated strut ball socket
8 Retainer
| Remove/install | ||
Danger! | Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof. | When moving components, ensure that no body parts or limbs are within the operating range of moving parts. | |
1 | Remove headliner | With panoramic glass roof with top sliding roof, code 413 | |
With power glass tilting/sliding roof, code 414 | |||
Without panoramic glass roof with top sliding roof, code 413 and without power glass tilting/sliding roof, code 414 | |||
2 | Remove bottom section on cover from rear-end door weatherstripping | On repair side | |
3 | Securely support rear-end door in open position | Use suitable support. | |
4 | Remove rear gas-operated strut ball socket (3) from left rear-end door hinge (4) | Lift retainer (8) and press off rear gas-operated strut ball socket (3). | |
Installation: Wipe off rear gas-operated strut ball socket (3) and grease slightly inside.Ensure that gas-operated strut ball socket (3) is seated correctly on left rear-end door hinge (4). | |||
5 | Unclip cover (6) from roof frame | ||
6 | Pry front gas-operated strut ball socket (1) off of gas-operated strut ball socket (7) upward | Do not damage hydraulic lines (5)! | |
Installation: Wipe off gas-operated strut ball socket (7) and grease slightly.Position gas-operated strut (1) and press down front gas-operated strut ball socket (1) on gas-operated strut ball socket (7) until it arrests correctly. | |||
7 | Remove gas-operated strut (2) toward rear | Do not damage vehicle paint! | |
8 | Install in the reverse order |
Referenced documents
- ar6830p4300rt Remove/install headliner
- ar6830p4300rta Remove/install headliner
- ar8880p0003rt Remove/install covers on rear-end door sealing frame
- as0000z001101a Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.