ar7220p2558src

Remove/install liftgate unlocking switch

Type ar · topic 72.20 · version 0100 · 2016-01-25

Applies to: Model 453.4

Where it sits

Function group 3 Body › 72 Doors › 72.20 Tailgate, rear door — Series 453 (models 4**)

EinPAS 28 Convenience system/driver assistance system › 28.35 Convenience feature › 28.35.12 Sensor/switch/wiring harness — Series 453 (models 4**)

AR72.20-P-2558SRC

Remove/install liftgate unlocking switch

12.1.16

Model

453.4

Remove/install liftgate unlocking switch

1	Cover
2	Electrical connector
S15/1	Trunk lid/liftgate release switch

P72.20-3497-04

 Danger !	Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.	No parts of the body or limbs should be within the operating area when the components are moving.	AS00.00-Z-0011-01A
 	Remove/install
1	Loosen paneling (1) on outside of liftgate until trunk lid/liftgate release switch (S15/1) is accessible		AR72.20-P-1016SRA
2	Release and disconnect electrical connection (2)
3	Release trunk lid/liftgate release switch (S15/1) from inside, and pull outwards to remove
4	Install in the reverse order
	Check
5	Check function of trunk lid/liftgate release switch (S15/1) by mechanically locking liftgate latches

Referenced documents

ar7220p1016sra Remove/install outside trim on liftgate
as0000z001101a Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.