ar7220d4077ts

Remove/install release lever on left rear-end door

Type ar · topic 72.20 · version 0102 · 2019-03-13

Applies to: Model 907.6/7, 910.6

Where it sits

Function group 3 Body › 72 Doors › 72.20 Tailgate, rear door — Series 907 (models 6**, 7**) · Series 910 (models 6**)

EinPAS 29 Drive authorization/security system › 29.16 Locking/unlocking › 29.16.32 Lock/actuation — Series 907 (models 6**, 7**) · Series 910 (models 6**)

AR72.20-D-4077TS

Remove/install release lever on left rear-end door

26.02.2019

Model

907.6/7, 910.6

Remove/install release lever on left rear-end door

1	Catch hook
2	Release lever

D72.20-1260-06

 Warning	Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.	No parts of the body or limbs should be within the operating area when the components are moving.	AS00.00-Z-0011-01A
 	Remove/install
1	Use clip remover to press catch hook (1) into groove (arrow) of release lever (2) and remove release lever (2).	 Removal: Press catch hook (1) carefully. Otherwise damage will occur.
		 WIS Service Media wsm://04_ 201710_06
		 Clip remover	*452589016300
2	Install in the reverse order
	Check
3	Perform function check of release lever (2).

Remove/install release lever on left rear-end door

452 589 01 63 00

Clip remover

Referenced documents

as0000z001101a Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.