AR72.20-D-2580A | Remove/install locking mechanism of rear-end door | 11.2.03 |
MODEL 903.612 /613
with CODE (PR5) Westfalia lightweight box body
except CODE (PR6) Westfalia lightweight box body with Dautel lift gate
D72.20-1143-06
1 Spring
2 Handle
3 Pins
D72.20-1144-06
2 Handle
4 Upper door locking system
5 Lower door locking system
| Remove/install | ||
1 | Unhook springs (1) | ||
2 | Knock pins (3) on handle (2) through as far as possible with suitable punch and then pry out completely from inside with suitable pliers | Installation: If the door locks or handles are installed as new parts, it is first necessary to drill the 4 holes for the pins. For this purpose, position handle on lock, align in correct position with one another and drill together (drill diameter 5.0 mm). | |
3 | Pull door locking system (4) and (5) out upward and downward respectively and remove handle (2) | Installation: Observe installation position of locking rods (as illustrated in figure). | |
4 | Install in the reverse order |