AR72.20-D-2411D | Assemble/disassemble rear door (right door wing) | 17.1.01 |
MODEL 903.612 /613 with CODE (PG3) Integral box body with shelf system
MODEL 903.612 /613 with CODE (PG4) Integral box body without shelf system
MODEL 903.612 with CODE (PG5) UPS integral box body
MODEL 903.612 /613 with CODE (Z22) Post freight delivery service
D72.20-1148-09
1 Rear window
2 Door lock
3 Outer door handle
4 Connector
8 Rubber stopper
10 Closing wedge
5 Rivet
6 Bracket
7 Rear gate
| Disassemble/assemble | ||
Danger! | Risk of injury to fingers being jammed or squeezed when removing and installing or aligning hoods, doors, trunk lid/tailgate or sliding roof. | When moving components, ensure that no body parts or limbs are within the operating range of moving parts. | |
1.1 | Remove rear window (1) | New rear door (7) is delivered with rear window installed (1). | |
2 | Remove rear door lock (2) | ||
3 | Remove outer door handle (3) from rear door | ||
4 | Remove contact pins from connectors (4) | Cut open cable strap | |
5 | Drill out rivet (5) | Hand riveter | |
Drill (electric/pneumatic) | |||
6 | Remove bracket (6) | ||
7 | Remove rear door (7), right door wing | ||
8 | Remove rubber stopper (8) | ||
9 | Add sealing frame | ||
10 | Remove closing wedge (10) | ||
11 | Assemble in reverse order |
Commercially available tools
Workshop equipment
WE58.40-Z-1001-03A | Drill (electric/pneumatic) |
Referenced documents
- ar6720d5145d Remove/install rear window
- ar7220d1901d Remove/install rear-end door
- ar7220d2420d Remove/install outer door handle on rear door
- ar7220d4055d Remove/install rear-end door lock
- as0000z001101a Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.